‘Thermo-Luminance Studies Of Ultra-high Dilutions’ Provides Proof For ‘Molecular Imprinting’

“Potentized medicines contain supra-molecular clusters of water/ethyl alcohol, different from control medium, which will be evident from spectroscopic studies.”

This was one of my predictions proposed to be verified, as part of proving the concept of ‘molecular imprinting’ according to scientific methods.

I think the remarkable work discussed below, done by Louis Rey on thermo-luminescence of ultra-high dilutions of lithium chloride and sodium chloride, and published in December 2002, provides crucial support as a very strong proof for this very important prediction.

As per the reported work, ultra-high dilutions of lithium chloride and sodium chloride (10−30g cm−3) have been irradiated by X- and gamma rays at 77 K, then progressively re-warmed to room temperature. During that phase, their thermo-luminescence has been studied and it was found that, despite their dilution beyond the Avogadro number, the emitted light was specific of the original salts dissolved initially.

This wonderful observation that  high dilutions of salts very much above avogadro number retains the specific thermo-luminance patterns reminding of of original salts seems to be very crucial. This phenomenon could be well explained only in terms of supramolecular nanostructures of water carrying the imprints of exact ‘conformations’  of ‘individual’ molecules of salts, as explained by MIT concepts.

Thermo-luminance studies have been developed and utilized so far as a “tool to study the structure of solids, mainly ordered  crystals”. In the present study, the researchers successfully utilized it in ultra-high aqueous dilutions, which demonstrates the short range ‘crystalline’ character of water as well as high dilution preparations.

Actually, the researchers took up this work to ‘challenge’ the ‘water memory’ theory, but proved it otherwise. They confess in their report: “we thought that it would be of interest to challenge the theory according which preexistent ‘structures’ in the original liquid, developed around some added chemicals, could survive a great number of successive dilutions when done under vigorous mechanical stirring”.

Another important point to be noted is that the researchers did not use ‘commercial samples’ as most ‘researches’ do, but prepared themselves 15c dilutions of lithium chloride and sodium chloride under the guidance of boiron labs. This fact provides more scientific credence to this study.

The study “showed quite clearly that the initial addition of a solute (NaCl and LiCl) in the original D2O leaves a permanent  effect even when, by successive dilutions made under strong vibration, all traces of solute have disappeared.” The results were reproduced in several repeated experiments, “beyond any ambiguity”.

It should be specifically pointed out, researchers had no any idea of Molecular Imprinting. They propose the following hypothesis for explaining their observation:

“As a working hypothesis, we propose that this phenomenon results from a marked structural change in the hydrogen bond network initiated at the onset by the presence of the dissolved ions and maintained in the course of the dilution process, probably thanks to the successive vigorous mechanical stirrings.”

See, this hypothesis comes very close to the concept of Molecular Imprinting!

Thermally stimulated luminescence—often called thermo-luminescence—is a well known phenomenon amongst the thermally stimulated processes (thermally stimulated conductivity—thermally stimulated electron emission—thermogravimetry—differential thermal analysis and differential scanning calorimetry, etc.). Its theory and applications have been fully developed inter alia by McKeever, Chen and Visocekas and it proved to be a most interesting tool to study the structure of solids, mainly ordered  crystals. To that end, the studied material is “activated” at low-temperature, usually by radiant energy (UV, X-rays, gamma rays, electron beams, or neutrons) which most generally creates electrons–holes pairs which become separately “trapped” at different energy levels. Then, when the irradiated material is warmed up, the heating serves as a trigger to release the initially accumulated energy and the trapped electrons and holes move and recombine. A characteristic glow is emitted most often under the shape of different successive peaks according to the depths of the initial traps. As a general rule this phenomenon is observed in ordered crystals though it can be equally seen in disordered materials such as glasses. In that mechanism, imperfections in the lattice play a major role and are considered to be the place where luminescent centres appear. Thus, thermoluminescence is a good tool to study these imperfections and understand how they appear in the crystal.

This is exactly along those lines that the researchers carried our first investigations, starting, this time, from liquids which were turned into stable solids by low-temperature cooling.

Working essentially with water—mainly deuterium oxide—they have shown that the thermoluminescent glow of irradiated hexagonal ice consisted in two major peak areas—Peak 1 near 120 K and Peak 2 near 166 K  having well-defined emission spectra the D2O samples giving a much higher signal than the H2O ones.

In both cases, un-irradiated samples gave no signals whatsoever. For both D2O and H2O it was shown that the relative intensity of the thermoluminescence glow was a function of the irradiation dose and, that at least for Peak 2, it did show a maximum between 1 and 10 kGy .

As a first hypothesis on the nature of the emission itself it has been suggested by Teixeira that Peak 2 could be connected to the hydrogen-bond network within the ice which, in turn, could result from the structure of the original liquid sample, whilst Peak 1 looked to be closely related to the molecule. This strengthens the views on the involvement of hydrogen bonds in this mechanism.

To develop this concept further, the researchers did select to study the effect of lithium chloride on the thermoluminescence of irradiated D2O ice since this particular substance is known to suppress hydrogen bonds. The result, indeed, is spectacular and, at the relatively low concentration of 0:1M,  Peak 2 is totally erased whereas the basic emission of Peak 1 remains almost unchanged.

At that point the researchers thought that it would be of interest to challenge the theory according which pre-existent “structures” in the original liquid, developed around some added chemicals, could survive a great number of successive dilutions when done under vigorous mechanical stirring.

To that end they prepared, courtesy of the BOIRON LABORATORIES, ultra-high dilutions of lithium chloride and sodium chloride by successive dilutions to the hundredths, all done under vigorous mechanical stirring (initially 1 g in 100 cm3, then 1 cm3 of this solution in 99 cm3 of pure D2O … and so on) until they  reached— theoretically—at the 15th dilution, a “concentration” of10−30 g cm−3. A reference sample of D2O alone was also prepared according to this technique, still keeping vigorous agitation (150 strokes=7:5 s at each successive “dilution” step).

They did proceed, then, to the “activation” of these materials by irradiation according the following experimental protocol.

One cubic centimeter of each solution is placed in aluminium test cavities of 20 mm diameter and 2 mm depth and frozen to −20◦C on a cold metallic block. The frozen systems are kept 24 h at −20◦C to achieve stability into their crystallization patternand they are immersed into liquid nitrogen and kept at −196◦C for 24 h.

In a first set of experiments the frozen ice disks are irradiated at 77 K with 100 kV X-rays to achieve a dose of 0:4 kGy (30 min). Previous determinations were done to check that the disks having identical positions in the field did receive the same dose (dosimetry has been done using Harwell, FWT, and alanine dosimeters).

After irradiation, all the “activated” samples are transferred into a liquid nitrogen container and kept, there, for a week-time, to even out whatever small differences could exist between them.

Finally, all samples are placed in the thermoluminescence equipment and their respective glow recorded—with both a photo-multiplier and a CCD camera connected to a spectrograph—in the course of rewarming  (3=min) between 77 and  13 K, as has been done in our previous published experiments.

Much to their surprise, the experimental results do show—without any ambiguity— that for an X-ray dose of 0:4 kGy the thermoluminescence glows of the three  systems were substantially different . These findings did prove to be reproducible in the course of many different identical experiments.

To compare the curves between them the researchers normalized the emitted light readings taking Peak 1 as the reference. In doing so, we obtain for Peak 2 the different curves presented which show quite clearly that the initial addition of a solute (NaCl and LiCl) in the original D2O leaves a permanent  effect even when, by successive dilutions made under strong vibration, all traces of solute have disappeared.  More remarkable were the fact that, by far, lithium chloride demonstrates a stronger hydrogen bond suppressing “ghost” effect which could be related to the larger size of the lithium ion.

A second set of experiments done with gamma rays (courtesy of CELESTIN Reactor, COGEMA, Marcoule), at a higher dose (19 kGy) did confirm these findings

It appears, therefore, that the structural state of a solution made in D2O can be modified by the addition of selected solutes like LiCl and NaCl. This modification remains even when the initial molecules have disappeared and the effect is the same at different irradiation doses (0.4 –19 kGy) and for different radiant sources (X-rays, gamma rays). As a working hypothesis, the researchers propose that this phenomenon results from a marked structural change in the hydrogen bond network initiated at the onset by the presence of the dissolved ions and maintained in the course of the dilution process, probably thanks to the successive vigorous mechanical stirrings.

Researchers had no any idea of Molecular Imprinting. They proposes the following hypothesis for explaining their observation:

“As a working hypothesis, we propose that this phenomenon results from a marked structural change in the hydrogen bond network initiated at the onset by the presence of the dissolved ions and maintained in the course of the dilution process, probably thanks to the successive vigorous mechanical stirrings.”

See, this hypothesis comes very close to the concept of Molecular Imprinting!

If we fail to explain the observations of this monumental research in terms of Molecular Imprinting, there remains the danger that it will be hijacked by ‘energy medicine’ theoreticians, by interpreting in terms of ‘essence of drugs’, ‘information’, ‘vibrations’ and the like. Actually, Jan Scholten has already done that exercise, by saying ‘information’ of drugs  imprinted in water are the cause of thermoluminence observed by the researchers. Then he very cleverly fits this thermoluminence into his energy medicine frame work of ‘bioluminence’, vibrations, vital force, resonance and other pseudoscientific theories.

To be specific, precise and fitting to modern scientific knowledge system and its accepted paradigms, it is better to say ‘molecular imprints’ of original drug molecules are the cause of similarity of thermoluminence the researchers could observe. Such an explanation will clearly demonstrate that we are talking about the ‘complementary’ shape of drug molecules imprinted into nanostructures of water, which produce therapeutic effects by acting as ‘artificial binding sites’ for pathogenic molecules.

(Read this report  in its full form at http://www.janscholten.com/janscholten/Evidence_files/Rey.thermoluminescence.pdf  E-mail address: louis.rey@bluewin.ch (L. Rey)

Author: Chandran Nambiar K C

I started practicing homeopathy in 1970, when I was 20 years old and studying for final year of BSc (Zoology) course. My interest in homeopathy happened very accidentally, through a constant relationship with a local practitioner who happened to be father of my classmate. I was a regular visitor in his clinic, where from I started reading BOERICKE MATERIA MEDICA and other homeopathic books, which helped me to cure myself my troublesome asthma that have been haunting me since my childhood days. I became a voracious reader of homeopathy. I was also deeply involved in studying marxism and dialectical materialism during my college days, which attracted me to political activities. MARXISM and HOMEOPATHY became two essential parts of my intellectual and practical life, which still continues so. Even though I joined DHMS course in a karnataka homeopathic college, I could not continue it due to my intense involvement in revolutionary political activities that resulted in jail life and a lot of criminal cases. Once that phase was over, I took a diploma in veterinary science and became a livestock inspector in animal husbandry department under govt of kerala. I have been continuing my study and practice of homeopathy all through these years. Since CCH act came into force only in 1976, and it contained provisions allowing existing practitioners to continue, my homeopathic practice went smoothly in parallel with my government job. In 1987, co-operating with some local homeopaths and social activists, I started Kannur District Homeopathic Hospital Sociey, which established a chain of hospitals and homeopathic clinics in different parts of Kannur district. After a few years I had to leave the society for some political reasons, and I established a 100 bedded well equipped homeopathic hospital in Taliparamba, employing a number of prominent homeopaths. That was ended up as a financial disaster for me due to many reasons, including my lack of skills as a money manager, and I was compelled to close down my dream project with in a short period. I lost huge money I invested, lost my reputation, and it pulled me into a debt trap. I learned a lot of valuabl lessons from this failure- about life, human psychology, relationships, and above all, about myself. I realized failure is the greatest teacher, if you are prepared learn from it. I learned how will power and determination to win will help us come back into life as a phoenix from our own ashes. I learned, one does not fail unless he stops fighting and accepts failure. My failure and the hardships that followed has moulded my personality in such a way that I can now withstand any disaster and fight back. I tell you, you will not know what life really is, unless you miserably fail at least once in your life. By this time, I left my government job also, and settled as a full time homeopathic practitioner. By this practice, I could repair my earlier financial losses, and establish well in life. It was during this period that I felt the need of developing a simple and user-friendly homeopathic software, that resulted in the evolution of SIMILIMUM, which was later upgraded into SIMILIMUM ULTRA. Similimum Ultra was well accepted by the profession, and it collected good revenues which continues even today. I stopped my practice a few years back , and concentrated in the study and research activities to evolve scientifically viable explanations to the so-called riddles of homeopathy. This unrelenting study resulted in MIT or Molecular Imprints Therapeutics, which provides a scientific and rational explanation for homeopathy. I started a homeopathic discussion group on facebook called HOMEOPATHY FOR TOTAL CURE, which has more than 35000 homeopaths as members. By this work on facebook, I could establish close relationship with many homeopaths around the world. It goes on. I could successfully convert facebook as my office and work place, from where I propagate my MIT ideas, co-ordinate my works for homeopathic community, and sell my Similimum Ultra Software. My years of hardwork in search of HOW HOMEOPATHY WORKS ultimately resulted in the publication of a book titled REDEFINING HOMEOPATHY (3000 pages, 3 volumes, hard bound, Rs 6000), in which I have compiled my articles regarding my scientific explanations of basic principles of homeopathy. These ideas are called MIT or MOLECULAR IMPRINTS THERAPEUTICS. MIT is now included in the syllabus of MD (HOM) course of prestigious DY PATIL DEEMED UNIVERSITY, PUNE, INDIA. Research department of SARADA KRISHNA HOMEOPATHIC COLLEGE, Kulashekharam, Tamilnadu, India, the only NAC accredited homeopathy college in India, has recently taken up certain reserch projects for proving the scientific explanations proposed by MIT. Based on MIT perspective of homeopathy, I had developed an MIT PROTOCOL for scientific homeopathy, and initiated a project for establishing a chain of MIT NETWORK CLINICS all over India, where MIT PROTOCOL will be practiced. More over, I have developed a whole range of 351 MIT FORMULATIONS, which are disease-specific combinations of post-avogadro diluted homeopathy drugs. NOW I AM IN 71st YEAR OF MY LIFE, AND STILL LOOKING FOR NEW HORRIZONS!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s